Skip to content
routingcraft.net
routingcraft.net
  • Home
  • About

Tag: Segment Routing

Generating an optimal segment list for SR-TE

April 22, 2025 routingcraft Leave a comment

Segment Routing simplifies MPLS for the network operator – but not for the developer.…

Continue Reading →

Filed under: anycast routing, ECMP, MPLS, Segment Routing, SR-TE, traffic engineering

Loopback as a Service

February 18, 2025 routingcraft Leave a comment

Methods of steering traffic into MPLS and Segment Routing LSP is one of the least standardized and most confusing parts of traffic engineering.…

Continue Reading →

Filed under: MPLS, network design, RSVP-TE, Segment Routing, SR-TE, traffic engineering

Egress Peer Engineering: building blocks

October 7, 2024 Dmytro Shypovalov Leave a comment

Since exploring the EPE basics, now it’s time to understand the building blocks of the solution.…

Continue Reading →

Filed under: BGP, EPE, MPLS, Segment Routing, SR-TE

Egress Peer Engineering: basics

September 23, 2024 Dmytro Shypovalov Leave a comment

Egress Peer Engineering extends regular BGP policies to provide more flexibility.…

Continue Reading →

Filed under: BGP, EPE, MPLS, Segment Routing, SR-TE

Poor man’s Traffic Engineering

September 2, 2024 Dmytro Shypovalov Leave a comment

Segment Routing allows the network operator to deploy Traffic Engineering even with the most basic routers that support the bare minimum of features.…

Continue Reading →

Filed under: network design, Segment Routing, SR-TE

Making Segment Routing user-friendly

July 1, 2024 routingcraft 4 Comments

Segment Routing was supposed to make MPLS easier and give more power to network operators. Sadly, vendors decided to make it harder by selling weird protocols and over-engineered controller bloatware.…

Continue Reading →

Filed under: MPLS, network design, Segment Routing, SR-TE

Explicit Null in Segment Routing

January 13, 2022 routingcraft Leave a comment

MPLS is such a user-friendly technology it needs a special label that does nothing.

…

Continue Reading →

Filed under: MPLS, Segment Routing, SR-TE

Anycast in Segment Routing

November 9, 2021 routingcraft 6 Comments

MPLS or Anycast Routing – for a long time, you had to choose one. Segment Routing allows you to have both.…

Continue Reading →

Filed under: anycast routing, ECMP, fast convergence, IS-IS, MPLS, Segment Routing, SR-TE, TI-LFA

Equal Routes

June 17, 2020 routingcraft 1 Comment

In highload cloud networks there is so much traffic that even 100G/400G port speeds do not suffice, so sharing the load over multiple links is the only feasible solution.

…

Continue Reading →

Filed under: BGP, ECMP, load balancing, MPLS, Segment Routing, SR-TE

Topology Dependent LFA

April 10, 2020 routingcraft 7 Comments

Fast convergence after failures has always been an important part of ISP network design.

…

Continue Reading →

Filed under: fast convergence, IS-IS, MPLS, Segment Routing, SR-TE, TI-LFA

Archives

  • April 2025 (1)
  • February 2025 (2)
  • December 2024 (1)
  • October 2024 (1)
  • September 2024 (2)
  • July 2024 (1)
  • January 2022 (1)
  • December 2021 (1)
  • November 2021 (1)
  • October 2021 (1)
  • October 2020 (1)
  • June 2020 (1)
  • May 2020 (2)
  • April 2020 (2)
  • March 2020 (2)
  • February 2020 (1)

tags

anycast routing (3) ARP (1) BGP (8) ECMP (3) EIGRP (1) EPE (3) EVPN (4) fast convergence (4) IGMP (1) IS-IS (4) L3VPN (2) LDP (2) load balancing (1) MLAG (1) MPLS (14) multicast (2) MVPN (2) network design (4) OSPF (3) PIC (1) PIM (2) redistribution (2) RIP (1) RSVP-TE (2) Segment Routing (10) SR-TE (10) TI-LFA (2) traffic engineering (3) troubleshooting (1) VRF (2)